Qidong Delo Lubrication Equipment Co

Series two-line distributor
1. Overview
Series two-line distributor is suitable for two-line dry oil centralized lubrication system with nominal pressure of Under the action of oil supply pressure, the oil supply pressure directly controls the piston movement to supply oil, completing the function of quantitatively distributing grease to the lubrication points.
This series of double-line distributors are equipped with oil outlets on the front and on the upper and lower sides. It is a bidirectional oil outlet. The upper row on the front is connected to the corresponding oil outlet above, and the lower row on the front is connected to the corresponding oil outlet on the bottom. Through, you can choose arbitrarily according to the piping direction. The forward and reverse movements of the distributor piston discharge the grease from the upper and lower oil outlets respectively. In order to facilitate the increase of the oil supply amount, it is easy to change the odd number of oil outlets. In the upper and lower corresponding outlets, There is also a two-in-one structure between the oil ports. When using, you only need to unscrew the screws in the lower outlet, and the unused outlets can be blocked with screw plugs. Series two-line distributors can directly observe the working condition of the distributor from the movement of the indicator rod, and can also easily adjust the oil supply volume of each oil outlet within the specified range by adjusting the screws.






2. Technical parameters

Model
Number of outlets
Nominal pressure
Oil supply/circulation
Adjustment amount per turn of the adjusting screw
Weight




br/ >











< br/>








br/>




















br/>




< br/>














br/>
























The cone penetration of the medium to be used is not less than (℃,) / grease (~) or the lubricating oil with a viscosity grade greater than the operating environment temperature is ℃ to ℃. The medium to be used is When using lubricant, please use the following.

3. Model Description


4. Dimensions

Model


< br/>























< br/>























< br/>

Model

























































5. Ordering Instructions
/> If the distributor is installed and used with an ambient temperature other than ℃ ~ ℃, it must be specified in the order contract so that low- and high-temperature resistant oil seals can be used when supplying.